0191 5166635 or 07715 994065
Posted on
We are a leader in heat tracing applications; we offer energy-efficient and cost effective products and services.
For commercial buildings, whether it is renovation or new construction, we provide a wide range of solutions.
| Applications Cold water pipes  |
Hot water supply |
Ice Free fire sprinkler lines |
Ice Free – Roads, Ramps and stairways |
Ice and Snow protection -Gutters and Roofs |
Ice Prevention to emergency stairways |
Underfloor heating |
Domestic ApplicationsModern day homes and offices require more from the modern day builder. New design possibilities added with ever increasing inventive interior products to install, it is imperative to keep ahead of the curve.We are one of the UKs leading manufacturer of electric underfloor heating solutions, ice and snow melting systems and pipe protection with [...]
ATEX is the name commonly given to the two European Directives for controlling explosive atmospheres: 1) Directive 99/92/EC (also known as 'ATEX 137' or the 'ATEX Workplace Directive') on minimum requirements for improving the health and safety protection of workers potentially at risk from explosive atmospheres.An explosive atmosphere is defined as a mixture of dangerous [...]
We believe in openly sharing informationEven if I try to reproduce, ingredient by ingredient, my grandmother’s recipe for apple pie, I never get a pie as good as hers. The same applies to information. Data is of little use without the know-how, experience and thousands of imperceptible details. Hopefully, the information we share today will [...]
Industrial ApplicationsWe are a leading supplier of electrical heating systems and services. We are a company with experience spanning over 40 years.We design, manufacture, supply and install heating solutions for all applications to all industriesOur expertise allow us to provide turn-key tailor-made solutions that are optimised to give the best technical solution for [...]
CE is an acronym for the French phrase "Conformite Europeene" and is similar to the UL or CSA marks of North America. Unlike UL or CSA which require independent laboratory testing, the CE mark can be applied by the manufacturer through a "self-certifying" procedure that verify that products are designed to the appropriate standards.The European [...]
Specifications:BS 7671 - British StandardAlso known as the IEE (Institute of Electrical Engineering) wiring regulations and is the standard that all electrical installations must adhere to.CircuitAn assembly of electrical equipment supplied from the same origin and protected against over current by the same protective device(s).Circuit Breaker or RCDA device capable of making, carrying and breaking [...]
Introduction to Heat TransferHeat transfer is the exchange of thermal energy between physical systems. The rate of heat transfer is dependent on the temperatures of the systems and the properties of the intervening medium through which the heat is transferred. The three fundamental modes of heat transfer are conduction, convection and radiation.Fourier Law of [...]
Standards and approved codes of practice Electrical standards and approved codes of practiceListed below are some commonly used electrical standards and approved codes of practice. Additional standards and codes of practice would generally be needed to satisfy a specific application - it is the responsibility of the specifier to select and apply these. You should [...]
What is renewable energy?Renewable energy is generated from natural resources such as the sun, wind, and water, using technology which ensures that the energy stores are naturally replenished. What are the benefits of installing renewables?There are lots of good reasons to use renewables. You will be: making use of secure and local resourcesreducing your dependence [...]